Operating System Requirements: Mac OS X 10.3-10.5 File Name: temposata_v224.dmg File Size: 416.5 KB Description: This software enables the use of Tempo SATA cards (Tempo SATA E4P, Tempo SATA E4i, Tempo SATA X4P, Tempo SATA X4i, Tempo-X eSATA 8, Tempo-X SATA 4+4) in Power Mac G5 and Power Mac G4 computers running Mac OS X. This version fixes an issue that caused drive formatting to fail intermittently. This version also fixes greater than 2TB drive volume support, and restores S.M.A.R.T. data reporting support in systems running Mac OS X v10.4. Note: This software runs only under Mac OS X. NOT Supported: Tempo SATA E2P, Tempo Serial ATA, Tempo HD.
Macintosh bootable volumes are supported on the internal 2-port PCI card (part number TSATA) but are not supported on any of the other SATA cards at this time.
When attempting to connect a Sonnet Tempo eSATA locking cable to a Tempo SATA E4P card in an Xserve, the locking connector housing may not fit in the tight space at the rear of the Xserve. To properly connect the cable, simply remove the locking housing from the connector end (two screws) and it will fit.
Another manufacturer's previously-installed SATA driver may be accessing a Sonnet SATA card in error causing a drive access slowdown. For example, we have seen Fusion D400QR5 performance drop from 200MB/s to under 50MB/s in such circumstances. The solution is to remove the other manufacturer's SATA driver.
Sonnet has tested the following cards with the Drobo S:
Tempo SATA E2P..............................compatible
Tempo SATA E4P..............................not compatible
Tempo SATA ExpressCard/34...........compatible
Tempo SATA Edge ExpressCard/34...compatible
Tempo SATA Pro ExpressCard/34.....not compatible
Tempo SATA X4P..............................not compatible
Qio eSATA ports...............................not compatible