| ID | | Article Title | Post Date |
|
491 | 
| Are Sonnet Tempo SATA cards compatible with the Drobo S? | Feb-02-11 |
| Sonnet has tested the following cards with the Drobo S:
Tempo SATA E2P..............................compatible
Tempo SATA E4P..............................not compatible
Tempo SATA ExpressCard/34...........compatible
Tempo SATA Edge ExpressCard/34...compatible
Tempo SATA Pro ExpressCard/34.....not compatible
Tempo SATA X4P..............................not compatible
Qio eSATA ports...............................not compatible
|
| |
|
495 | 
| My P2 card is unexpectedly unmounting from my Qio after I wake a MacPro or MacBook Pro from sleep. | Mar-24-10 |
|
499 |
| I get a blue screen on my Mac Pro/MacBook Pro instead of booting when I connect Qio | Mar-24-10 |
|
501 |
| Are all C600X CF Cards more or less equal performance in a Qio? | Mar-22-10 |
|
503 |
| Can I power the Qio from a FireWire port on a MacBook Pro? | Mar-23-10 |
|
509 |
| Is the Qio driver compatible with a 64-bit kernel boot of OS X 10.6 or 10.7? | Feb-28-12 |
|
510 |
| Can I use the AJA IO Express with the Sonnet Qio in a MacBook Pro? | Mar-23-10 |
|
512 |
| My Qio was working fine with my ExpressCard/34 bus interface card, but the Qio does not work with my PCIe Express bus interface card in an early 2009 MacPro. | Mar-31-10 |
|
514 |
| My unibody MacBook Pro will spontaneously restart after shutdown with Qio attached. | Mar-31-10 |
| Check the bottom of the Qio for the serial number.
This can occur on some Qio units with a serial number begins with A, B, or C. Contact Sonnet support for more information. |
| |
|
516 |
| What kind of battery can I use with the Qio? | Apr-08-10 |
| A battery should be capable of providing 12Volts @ 3 Amps and have an XLR 4-pin power connector. Nominal power usage of Qio is 9W, and attached F2s are 8 Watts each. An example of a compatible battery is the Bescor MM7XLR-NC (BC-500 charger sold separately) that can provide 12Volts @ 7.2Amps and has a 50 Watt-hour capacity. This battery could power a Qio for 5.5 hours, or a Qio plus F2 for 3 hours. |
| |
|
527 |
| Why does my Macintosh take so long to boot when the Qio is attached?
| Apr-27-11 |
|
528 |
| Why can't a Mac Pro acknowledge the Qio if it is plugged in after the Mac is booted? | Aug-31-10 |
|
536 |
| With a Qio, my Mac Pro kernal panics when I shut down after using Avid Media Composer. | Oct-28-10 |
| Avid Media Composer 4.05 is not compatible with the Sony SxS driver. Please seek support from Avid and/or Sony. |
| |
|
547 |
| I'm getting a Mac OS X kernel panic when I remove an SxS card from the Qio connected to a Mac Pro that also has a video capture card installed. | Jan-17-11 |
|
563 |
| I'm getting a long blue screen when I boot a Macintosh with Qio installed. | Apr-27-11 |
| Reinstall the Qio software. |
| |
|
566 |
| I upgraded to 10.6.8 and my system no longer boots. | Sep-26-11 |
|
576 |
| What version of Mac OS X do I need for Qio? | Jan-17-13 |
|
581 |
| Is Qio Compatible with 17" Thunderbolt MacBook Pro? | Dec-21-11 |
|
632 |
| Is Qio compatible with Echo ExpressCard/34 Thunderbolt Adapter? | Dec-21-11 |
| No, the software is not yet compatible. When Qio is compatible, it will require the Sonnet PCIe Bus Extender ExpressCard/34 Revision B (serial number beginning with B), which began shipping December 2011; or the Sonnet PCIe 2.0 Bus Extender ExpressCard/34 that ships with Qio E3. |
| |
|
633 |
| Is Qio compatible with the Matrox T/ADP Thunderbolt Port Adapter? | Feb-28-12 |
|
639 |
| Is the Qio PCIe 2.0 Bus Extender card compatible in all slots of the Mac Pro 5,1? | May-06-13 |
|
646 |
| How can I read UDF Formatted SxS cards? | Apr-20-12 |
|
648 |
| Why is the Panasonic Mac OS X P2 driver not compatible with 64-bit mode, while the Sony SxS driver, CF driver and SATA drivers are compatible with 64-bit mode? | Feb-28-12 |
| The Sonnet QIO reader provides standard ExpressCard/34 slots and CardBus slots, which use standard Sony SxS drivers for the ExpressCard/34 slots, and standard Panasonic P2 drivers for the CardBus slots. Under Mac OS X, Sony supports 32-bit and 64-bit mode, and Panasonic supports only 32-bit mode. The Sonnet Qio family also supports Windows Vista and 7. Under Windows, both the Sony SxS driver and Panasonic P2 driver support 32- and 64-bit modes. (Also note that although the Qio P2 read speed is only 25MB/sec under Mac OS, it is 50MB/sec under Windows in the same Qio device.) Sonnet provides drivers for the Qio itself, the Qio's standard Compact Flash slots and the SATA ports, but the ExpressCard/34 and CardBus card drivers are provided by the proprietary card manufacturers\u8212 Sony and Panasonic, respectively.
Note that Panasonic has released a Mac OS X 64-bit driver for their proprietary PCD35 P2 reader, but not for their CardBus P2 driver, which would be needed to support 64-bit mode in the industry-standard CardBus slot of the Qio. |
| |
|
651 |
| Do Qio and Qio CF4 support UDMA 7 CompactFlash cards? | May-06-13 |
| Yes, Qio and Qio CF4 support UDMA 7 CompactFlash cards in UDMA 6 mode.
Background: CompactFlash Revision 6.0 (November 2010) added UltraDMA Mode 7 (167 MB/s), which is up to 20% faster than UDMA 6 (133MB/sec). All UDMA 7 CompactFlash cards are compatible with UDMA 6 cameras and readers.
The Qio's CompactFlash slots can be read concurrently. The Qio can read the fastest CF cards at up to 133MB/s each and a total aggregate of 200MB/s (two cards).
The Qio CF4 can read all four CompactFlash slots concurrently. When connected to a desktop machine, the maximum aggregate read speed is 133MB/sec (one card), 266MB/sec (two cards), 400MB/sec (three or four cards). |
| |
|
653 |
| I connected a Red Station media reader to the eSATA ports, but the media would not mount. How do I mount the media? | May-06-13 |
|
678 |
| Is the Qio compatible with OS X 10.8 (Mountain Lion)? | May-06-13 |
|
693 |
| My computer kernel panics after updating OS X to 10.8.2. What can I do to fix it? (Qio/Qio CF4/Qio E3 issue) | Nov-06-12 |
|
713 |
| My Qio Does Not Recognize My SD-to-SxS Adapter | May-07-13 |
|
730 |
| I have a Retina MacBook Pro (or other Mac introduced in 2012), and my machine won't boot after installing Qio software. | Dec-06-12 |
| |
