| ID | | Article Title | Post Date |
|
491 | 
| Are Sonnet Tempo SATA cards compatible with the Drobo S? | Feb-02-11 |
| Sonnet has tested the following cards with the Drobo S:
Tempo SATA E2P..............................compatible
Tempo SATA E4P..............................not compatible
Tempo SATA ExpressCard/34...........compatible
Tempo SATA Edge ExpressCard/34...compatible
Tempo SATA Pro ExpressCard/34.....not compatible
Tempo SATA X4P..............................not compatible
Qio eSATA ports...............................not compatible
|
| |
|
495 | 
| My P2 card is unexpectedly unmounting from my Qio after I wake a MacPro or MacBook Pro from sleep. | Mar-24-10 |
|
499 |
| I get a blue screen on my Mac Pro/MacBook Pro instead of booting when I connect Qio | Mar-24-10 |
|
501 |
| Are all C600X CF Cards more or less equal performance in a Qio? | Mar-22-10 |
|
503 |
| Can I power the Qio from a FireWire port on a MacBook Pro? | Mar-23-10 |
|
509 |
| Is the Qio driver compatible with a 64-bit kernel boot of OS X 10.6 or 10.7? | Feb-28-12 |
| No, not at this time. 64-bit kernal boot is partially supported, with the following caveats 1) The Panasonic P2 driver is not 64-bit compatible, and 2) Sleep is not supported. |
| |
|
510 |
| Can I use the AJA IO Express with the Sonnet Qio in a MacBook Pro? | Mar-23-10 |
| Yes. Just plug the AJA ExpressCard/34 adapter into one of the Qio's two ExpressCard/34 slots. |
| |
|
512 |
| My Qio was working fine with my ExpressCard/34 bus interface card, but the Qio does not work with my PCIe Express bus interface card in an early 2009 MacPro. | Mar-31-10 |
|
514 |
| My unibody MacBook Pro will spontaneously restart after shutdown with Qio attached. | Mar-31-10 |
|
516 |
| What kind of battery can I use with the Qio? | Apr-08-10 |
|
527 |
| Why does my Macintosh take so long to boot when the Qio is attached?
| Apr-27-11 |
| It is normal for the Macintosh to take a long time to boot (as long as 10 minutes) the first time after a Qio is attached. All the new drivers need to be discovered and the kernal caches built. It is important to let this initialization process complete without interruption.
However, in some instances, the Mac takes a long time for subsequent boots as well. If this occurs, run the Qio System Uninstaller and rerun the Qio System Installer. This should clear the problem. |
| |
|
528 |
| Why can't a Mac Pro acknowledge the Qio if it is plugged in after the Mac is booted? | Aug-31-10 |
|
536 |
| With a Qio, my Mac Pro kernal panics when I shut down after using Avid Media Composer. | Oct-28-10 |
|
547 |
| I'm getting a Mac OS X kernel panic when I remove an SxS card from the Qio connected to a Mac Pro that also has a video capture card installed. | Jan-17-11 |
|
563 |
| I'm getting a long blue screen when I boot a Macintosh with Qio installed. | Apr-27-11 |
|
566 |
| I upgraded to 10.6.8 and my system no longer boots. | Sep-26-11 |
| If you have Qio 1.0.5 software installed and you upgrade to 10.6.8 you will no longer be able to boot. Sonnet strongly recommends that you install Qio 1.1 software before upgrading to 10.6.8 or 10.7. If you have installed 10.6.8 prior to installing Qio 1.0.6 or 1.1 software and are not able to boot, you can recover with the following steps:
1) Boot Mac OS X from an external drive or DVD.
2) In the Finder, remove the spaces from the name of your system disk that won't boot. For example, rename Macintosh HD to MacintoshHD. (If your system disk has another name use that name in place of MacintoshHD in the next two steps.)
2) Launch Terminal and type:
sudo rm -r /Volumes/MacintoshHD/System/Library/Extensions/STPCIFamily.kext
3) Type:
sudo cp -r "/Volumes/MacintoshHD/Library/Application Support/QIO/IOPCIFamily.kext" /Volumes/MacintoshHD/System/Library/Extensions (typed all on one line)
4) Type:
sudo touch /Volumes/MacintoshHD/System/Library/Extensions
5) Restart
6) Install Qio 1.1 or greater
7) Restart |
| |
|
576 |
| What version of Mac OS X do I need for Qio? | Jan-17-13 |
| OS X 10.5.8-10.8 required for Mac Pro and MacBook Pro (non-thunderbolt).
OS X 10.6.8-10.8 required for MacBook Pro (Thunderbolt). |
| |
|
581 |
| Is Qio Compatible with 17" Thunderbolt MacBook Pro? | Dec-21-11 |
|
632 |
| Is Qio compatible with Echo ExpressCard/34 Thunderbolt Adapter? | Dec-21-11 |
|
633 |
| Is Qio compatible with the Matrox T/ADP Thunderbolt Port Adapter? | Feb-28-12 |
|
639 |
| Is the Qio PCIe 2.0 Bus Extender card compatible in all slots of the Mac Pro 5,1? | May-06-13 |
|
646 |
| How can I read UDF Formatted SxS cards? | Apr-20-12 |
| You need to download and install the Sony SxS UDF Driver, available here http://pro.sony.com/bbsc/ssr/cat-recmedia/resource.downloads.bbsccms-assets-mkt-recmedia-downloads-upgrades.shtml |
| |
|
648 |
| Why is the Panasonic Mac OS X P2 driver not compatible with 64-bit mode, while the Sony SxS driver, CF driver and SATA drivers are compatible with 64-bit mode? | Feb-28-12 |
| The Sonnet QIO reader provides standard ExpressCard/34 slots and CardBus slots, which use standard Sony SxS drivers for the ExpressCard/34 slots, and standard Panasonic P2 drivers for the CardBus slots. Under Mac OS X, Sony supports 32-bit and 64-bit mode, and Panasonic supports only 32-bit mode. The Sonnet Qio family also supports Windows Vista and 7. Under Windows, both the Sony SxS driver and Panasonic P2 driver support 32- and 64-bit modes. (Also note that although the Qio P2 read speed is only 25MB/sec under Mac OS, it is 50MB/sec under Windows in the same Qio device.) Sonnet provides drivers for the Qio itself, the Qio's standard Compact Flash slots and the SATA ports, but the ExpressCard/34 and CardBus card drivers are provided by the proprietary card manufacturers\u8212 Sony and Panasonic, respectively.
Note that Panasonic has released a Mac OS X 64-bit driver for their proprietary PCD35 P2 reader, but not for their CardBus P2 driver, which would be needed to support 64-bit mode in the industry-standard CardBus slot of the Qio. |
| |
|
651 |
| Do Qio and Qio CF4 support UDMA 7 CompactFlash cards? | May-06-13 |
|
653 |
| I connected a Red Station media reader to the eSATA ports, but the media would not mount. How do I mount the media? | May-06-13 |
|
678 |
| Is the Qio compatible with OS X 10.8 (Mountain Lion)? | May-06-13 |
|
693 |
| My computer kernel panics after updating OS X to 10.8.2. What can I do to fix it? (Qio/Qio CF4/Qio E3 issue) | Nov-06-12 |
|
713 |
| My Qio Does Not Recognize My SD-to-SxS Adapter | May-07-13 |
|
730 |
| I have a Retina MacBook Pro (or other Mac introduced in 2012), and my machine won't boot after installing Qio software. | Dec-06-12 |
| |
