Qio for Mac
Please click the arrow next to the category to expand or collapse:
Driver (6)
Firmware (2)
Manual (4)
FAQ (31)
IDArticle TitlePost Date
491 Are Sonnet Tempo SATA cards compatible with the Drobo S?Feb-02-11
495 My P2 card is unexpectedly unmounting from my Qio after I wake a Mac Pro or MacBook Pro from sleep.Aug-01-13
499 I get a blue screen on my Mac Pro/MacBook Pro instead of booting when I connect QioMar-24-10
501 Are all C600X CF Cards more or less equal performance in a Qio?Mar-22-10
Sonnet measured read performance for three manufacturers' 600X (90MB/sec) CF cards in the Qio, connected to a MacBook Pro:
Lexar Professional 600X...86MB/sec
Transcend 600X...............71MB/sec
SanDisk Extreme Pro........61MB/sec
 
503 Can I power the Qio from a FireWire port on a MacBook Pro?Mar-23-10
This powering method is not officially supported because the Qio can require more power than one FireWire port's power specification. However, the single FireWire port on the unibody MacBook Pro seems to be capable of providing more power (up to 20W in our test) than its specification. In Sonnet tests under the following conditions:
1) If Qio is used with only memory cards (SxS's or SDHC, but not ExpressCard/34 controller cards; P2 cards but not CardBus controller cards; and/or CF Cards);
2) Qio has not more than one Fusion F2 powered from the Qio; and
3) MacBook Pro is unibody model;
then the Qio plus one Fusion F2 seems to be able to be bus powered from the unibody MacBook Pro FireWire port. You would need to use the FireWire power cable provided with the Fusion F2. Sonnet does not guarantee or support this configuration.

This does not seem to work in MacBook Pro models previous to the unibody.
 
509 Is the Qio driver compatible with a 64-bit kernel boot of OS X 10.6 or 10.7?Aug-01-13
Yes. Compatiblity requires Qio software version 1.2.3 or later.
 
510 Can I use the AJA IO Express with the Sonnet Qio in a MacBook Pro?Mar-23-10
512 My Qio was working fine with my ExpressCard/34 bus interface card, but the Qio does not work with my PCIe Express bus interface card in an early 2009 MacPro.Mar-31-10
514 My unibody MacBook Pro will spontaneously restart after shutdown with Qio attached.Mar-31-10
Check the bottom of the Qio for the serial number.
This can occur on some Qio units with a serial number begins with A, B, or C. Contact Sonnet support for more information.
 
516 What kind of battery can I use with the Qio?Apr-08-10
527 Why does my Maci take so long to boot when the Qio is attached? Jul-31-13
528 Why can't a Mac Pro acknowledge the Qio if it is plugged in after the Mac is booted? Sep-13-13
536 With a Qio connected, my Mac Pro kernel panics when I shut down after using Avid Media Composer.Jul-31-13
547 I'm getting a OS X kernel panic when I remove an SxS card from the Qio connected to a tower Mac Pro that also has a video capture card installed.Oct-31-14
563 I'm getting a long blue screen when I boot a Mac with Qio installed.Sep-13-13
566 I upgraded to 10.6.8 and my system no longer boots.Sep-26-11
576 What version of OS X do I need to use Qio with MacBook Pro?Aug-20-14
OS X 10.5.8-10.9 required for Mac Pro and MacBook Pro (non-Thunderbolt).
OS X 10.6.8-10.9 required for MacBook Pro (Thunderbolt).
 
581 Is Qio Compatible with 17" Thunderbolt MacBook Pro?Sep-13-13
632 Is Qio compatible with Echo ExpressCard/34 Thunderbolt Adapter?Jul-31-13
633 Is Qio compatible with the Matrox T/ADP Thunderbolt Port Adapter?Feb-28-12
639 Is the Qio PCIe 2.0 Bus Extender card compatible in all slots of the Mac Pro 5,1?May-06-13
No, the Qio PCIe 2.0 Bus Extender card does not work in the x16 slot (slot 2) in the Mac Pro 5,1. Use slot 3 or 4 instead.
 
646 How can I read UDF Formatted SxS cards?Aug-11-17
648 Why is the Panasonic OS X P2 driver not compatible with 64-bit mode, while the Sony SxS driver, CF driver and SATA drivers are compatible with 64-bit mode?Oct-31-14
This issue is now resolved. The Panasonic P2 driver included with Qio software version 1.2.3 and later is 64-bit compatible. Installing Qio 1.3.2 or later adds P2 support to systems running OS X in 64-bit mode, including Mavericks (10.9) and Yosemite (10.10)
 
651 Do Qio and Qio CF4 support UDMA 7 CompactFlash cards?May-06-13
653 I connected a Red Station media reader to the eSATA ports, but the media would not mount. How do I mount the media?May-06-13
Mac OS 10.7.5 will not mount FAT32 volumes connected to the eSATA ports of this device. (FAT32 volumes mount fine in 10.6.8 and in 10.8.2 and later.)

As a workaround, you can manually mount volumes with the following procedure:

1) Open terminal (Applications > Utilities > Terminal)
2) Run the following command:
diskutil list

Look for the target volume in the IDENTIFIER column. The volume will have a name like disk4s2.

3) Create a mount point by using the following terminal command:
mkdir /Volumes/myvolume

Note: myvolume is the name of the mount point you will create and must be unique - for example, you cannot mkdir /Volumes/FAT if a volume named FAT is already mounted.

4) Mount the target volume with the command:
sudo mount -t msdos /dev/disk4s2 /Volumes/myvolume

Note: disk4s2 is the from the IDENTIFIER column from step 2. myvolume is the unique name you chose in step 3.

The volume should now be mounted and is available for use. The volume must also be unmounted through terminal - finder will not be able to unmount the volume.

The command to unmount the volume is:
sudo umount /Volumes/myvolume

where myvolume is the mount point you created in step 3.
 
678 Is the Qio compatible with OS X 10.10 (Yosemite) and OS X 10.9.5 (Mavericks)?Oct-31-14
693 My computer kernel panics after updating OS X to 10.8.2. What can I do to fix it? (Qio/Qio CF4/Qio E3 issue)Nov-06-12
713 My Qio Does Not Recognize My SD-to-SxS AdapterMay-07-13
730 I have a Retina MacBook Pro (or other Mac introduced in 2012), and my machine won't boot after installing Qio software.Dec-06-12
Boot in safe mode. In Terminal, type: sudo nvram boot-args="dart=0x0" and restart. You can undo this later with the command sudo nvram -d boot-args .
 
757 My Stardom RAIDSonic ST3620-2S-S2 is not reliable with 6Gb drives and and a 6Gb controller.Jul-08-13
The Stardom RAIDSONIC ST3620-2S-S2 is not reliable when connected at 6Gb. It was designed for 3Gb SATA. If you connected previously using a 3Gb controller, even with 6Gb drives, the connection was 3Gb. With the 6Gb controllers and 6Gb drives, the connection is negotiated at 6Gb, but the connection is not reliable because of the older design of the Stardom chassis does not support 6Gb. The drives may not be recognized or if recognized, transfers will fail at some point.
 
1135 Can I format an SxS card in UDF format in macOS?Jan-20-21