ID | | Article Title | Post Date |
491 |
| Are Sonnet Tempo SATA cards compatible with the Drobo S? | Feb-02-11 |
| Sonnet has tested the following cards with the Drobo S:
Tempo SATA E2P..............................compatible
Tempo SATA E4P..............................not compatible
Tempo SATA ExpressCard/34...........compatible
Tempo SATA Edge ExpressCard/34...compatible
Tempo SATA Pro ExpressCard/34.....not compatible
Tempo SATA X4P..............................not compatible
Qio eSATA ports...............................not compatible
|
  |
495 |
| My P2 card is unexpectedly unmounting from my Qio after I wake a Mac Pro or MacBook Pro from sleep. | Aug-01-13 |
| Install Qio software version 1.2.3 or later to resolve the issue. |
  |
499 |
| I get a blue screen on my Mac Pro/MacBook Pro instead of booting when I connect Qio | Mar-24-10 |
| The first time you boot with the Qio connected, the screen will stay blue for up to 6 minutes while the Mac is configuring the Qio slot space. Please be patient. Subsequent boots should be normal. Note that you must install the Qio software before connecting the Qio. |
  |
501 |
| Are all C600X CF Cards more or less equal performance in a Qio? | Mar-22-10 |
503 |
| Can I power the Qio from a FireWire port on a MacBook Pro? | Mar-23-10 |
| This powering method is not officially supported because the Qio can require more power than one FireWire port's power specification. However, the single FireWire port on the unibody MacBook Pro seems to be capable of providing more power (up to 20W in our test) than its specification. In Sonnet tests under the following conditions:
1) If Qio is used with only memory cards (SxS's or SDHC, but not ExpressCard/34 controller cards; P2 cards but not CardBus controller cards; and/or CF Cards);
2) Qio has not more than one Fusion F2 powered from the Qio; and
3) MacBook Pro is unibody model;
then the Qio plus one Fusion F2 seems to be able to be bus powered from the unibody MacBook Pro FireWire port. You would need to use the FireWire power cable provided with the Fusion F2. Sonnet does not guarantee or support this configuration.
This does not seem to work in MacBook Pro models previous to the unibody. |
  |
509 |
| Is the Qio driver compatible with a 64-bit kernel boot of OS X 10.6 or 10.7? | Aug-01-13 |
| Yes. Compatiblity requires Qio software version 1.2.3 or later. |
  |
510 |
| Can I use the AJA IO Express with the Sonnet Qio in a MacBook Pro? | Mar-23-10 |
512 |
| My Qio was working fine with my ExpressCard/34 bus interface card, but the Qio does not work with my PCIe Express bus interface card in an early 2009 MacPro. | Mar-31-10 |
| Check the serial number on the bottom of the Qio. If it starts with A, contact Sonnet support for more information. |
  |
514 |
| My unibody MacBook Pro will spontaneously restart after shutdown with Qio attached. | Mar-31-10 |
| Check the bottom of the Qio for the serial number.
This can occur on some Qio units with a serial number begins with A, B, or C. Contact Sonnet support for more information. |
  |
516 |
| What kind of battery can I use with the Qio? | Apr-08-10 |
527 |
| Why does my Maci take so long to boot when the Qio is attached?
| Jul-31-13 |
| It is normal for the Mac to take a long time to boot (as long as 10 minutes) the first time after a Qio is attached. All the new drivers need to be discovered and the kernal caches built. It is important to let this initialization process complete without interruption.
However, in some instances, the Mac takes a long time for subsequent boots as well. If this occurs, run the Qio System Uninstaller and rerun the Qio System Installer. This should clear the problem. |
  |
528 |
| Why can't a Mac Pro acknowledge the Qio if it is plugged in after the Mac is booted? | Sep-13-13 |
| Plugging in a Qio is like plugging in PCIe cards. In the Mac Pro's case, although media (DVDs, CF cards, SD cards, etc) can be plugged in, there was never an expectation by OS X that a PCIe card could be hot-plugged into a Mac Pro. As a result, OS X has no infrastructure for detecting and starting a driver loading process. The plug-in event is not noticed by the system. |
  |
536 |
| With a Qio connected, my Mac Pro kernel panics when I shut down after using Avid Media Composer. | Jul-31-13 |
| Avid Media Composer 4.05 is not compatible with the Sony SxS driver. Please seek support from Avid and/or Sony. |
  |
547 |
| I'm getting a OS X kernel panic when I remove an SxS card from the Qio connected to a tower Mac Pro that also has a video capture card installed. | Oct-31-14 |
| If you have a Mac Pro model 1,1, put the video capture card (such as AJA Kona or Black Magic DeckLink card) in Mac Pro PCIe slot 3 and the Qio bus interface card in PCIe slot 2 to fix this issue. If you have a different model of Mac Pro, the problem occurs only in one of Qio's SxS slots, so use only the other SxS slot. Sonnet and Sony are working to address this issue. |
  |
563 |
| I'm getting a long blue screen when I boot a Mac with Qio installed. | Sep-13-13 |
566 |
| I upgraded to 10.6.8 and my system no longer boots. | Sep-26-11 |
576 |
| What version of OS X do I need to use Qio with MacBook Pro? | Aug-20-14 |
581 |
| Is Qio Compatible with 17" Thunderbolt MacBook Pro? | Sep-13-13 |
| Yes, but you must hot plug the Qio's interface card into the ExpressCard/34 slot of the 17" Thunderbolt MacBook Pro. The Qio will not be recognized in the 17" Thunderbolt MacBook Pro if you boot or restart with the Qio plugged into the ExpressCard/34 slot. See FAQ 632 for more infomation about compatibility connecting Qio via Thunderbolt. |
  |
632 |
| Is Qio compatible with Echo ExpressCard/34 Thunderbolt Adapter? | Jul-31-13 |
| Yes, but it requires the Sonnet PCIe Bus Extender ExpressCard/34 Revision B (serial number beginning with B), which began shipping December 2011; or the Sonnet PCIe 2.0 Bus Extender ExpressCard/34. |
  |
633 |
| Is Qio compatible with the Matrox T/ADP Thunderbolt Port Adapter? | Feb-28-12 |
639 |
| Is the Qio PCIe 2.0 Bus Extender card compatible in all slots of the Mac Pro 5,1? | May-06-13 |
| No, the Qio PCIe 2.0 Bus Extender card does not work in the x16 slot (slot 2) in the Mac Pro 5,1. Use slot 3 or 4 instead. |
  |
646 |
| How can I read UDF Formatted SxS cards? | Aug-11-17 |
648 |
| Why is the Panasonic OS X P2 driver not compatible with 64-bit mode, while the Sony SxS driver, CF driver and SATA drivers are compatible with 64-bit mode? | Oct-31-14 |
651 |
| Do Qio and Qio CF4 support UDMA 7 CompactFlash cards? | May-06-13 |
653 |
| I connected a Red Station media reader to the eSATA ports, but the media would not mount. How do I mount the media? | May-06-13 |
678 |
| Is the Qio compatible with OS X 10.10 (Yosemite) and OS X 10.9.5 (Mavericks)? | Oct-31-14 |
693 |
| My computer kernel panics after updating OS X to 10.8.2. What can I do to fix it? (Qio/Qio CF4/Qio E3 issue) | Nov-06-12 |
| The OS X 10.8.2 update breaks compatibility with Qio, Qio CF4, and Qio E3 pro media readers, resulting in kernel panics on systems with Qio v1.1.6 and earlier software installed. By following the steps below, you may enable your system to work again, but the Qio will not operate after the procedure until you install Qio v1.1.8 or later software.
Process:
1. Cold-boot your computer holding the cmd and R keys together (this forces the computer to boot from the recovery partition)
2. Select the language
3. Open the Disk Utility application
- If your main operating system drive is locked (grayed out), select it and choose to “unlock” in the icon list at the top of the screen
- Note the name of the volume that holds your operating system - usually "Macintosh HD" – you will need this name later in these instructions
4. Quit Disk Utility
5. From the Utilities Menu, open the Terminal application.
6. Type the following commands, pressing the Enter key in between each command:
NOTE: In the following commands, <VOLNAME> is the name of the partition that your operating system resides on. This should have been obtained in step 3b. If your volume name has a space in it, such as "Macintosh HD", a “\” character must precede the space in the volume name (ie "Macintosh\ HD")
rm -r /Volumes/<VOLNAME>/System/Library/Extensions/STPCIFamily*
cp -rf /Volumes/<VOLNAME>/Library/Application\ Support/QIO/IOPCIFamily.kext /Volumes/<VOLNAME>/System/Library/Extensions
touch /Volumes/<VOLNAME>/System/Library/Extensions
7. Quit all applications and restart the computer.
|
  |
713 |
| My Qio Does Not Recognize My SD-to-SxS Adapter | May-07-13 |
730 |
| I have a Retina MacBook Pro (or other Mac introduced in 2012), and my machine won't boot after installing Qio software. | Dec-06-12 |
| Boot in safe mode. In Terminal, type: sudo nvram boot-args="dart=0x0" and restart. You can undo this later with the command sudo nvram -d boot-args . |
  |
757 |
| My Stardom RAIDSonic ST3620-2S-S2 is not reliable with 6Gb drives and and a 6Gb controller. | Jul-08-13 |
1135 |
| Can I format an SxS card in UDF format in macOS? | Jan-20-21 |
| Yes, but you must use Terminal.
1) Open Terminal
2) Run
diskutil list
to get the name of the disk. It will be something like "disk4". Ejectable media are typically the last in the list.
3) Run
newfs_udf -v "My Volume Name" disk4
if disk4 was the correct one. The volume name is anything you want of course.
4) Unplug and replug the SxS card
(Due to somebody's bug, the disk will only mount after being ejected.)
5) You can run
newfs_udf
without any parameters to see other parameters that can be set.
The process can be automated somewhat by writing a bash script, which can be looked up on the internet. |
  |
  |