Check the Device Manager to see if there is a "Standard Dual Channel PCI IDE Controller" under "IDE ATA/ATAPI Controllers" with two "ATA Channels" that have a yellow warning mark on it. If so, select the Standard Dual Channel PCI IDE Controller, click "update driver" and navigate to "Sonnet Tempo SATA QIO PCI Express Adapter" and install it. (Note that this requires that you first run the Qio driver installation.)
Some CF cards are seen as non-removable disks. Ejecting these cards will cause the whole Qio to eject. Restart the computer to restore functionality to the Qio and do not use "Eject" to remove CF cards.
The ethernet ports have been re-assigned new port numbers by Windows and do not have the previous settings. Any ethernet-specific settings must be reset in Adapter Settings. Sonnet is investigating this issue.
