|
Please click the arrow next to the category to expand or collapse: | | Driver (6) | | ID | | Download Title | Download Link | Post Date |
496 |
| Qio System Installer and Uninstaller (OS X, macOS) 1.5.0 | | Nov-29-2016 | | Operating System Requirements: Mac OS X 10.6+, macOS 10.12+ File Name: dskcd-qio-150.dmg File Size: 2.7 MB Description: This software enables the use of Qio with Mac Pro and MacBook Pro computers with a PCIe slot or ExpressCard slot, respectively, and other Mac computers connected via Thunderbolt. In addition to drivers to support Qio and its SATA controller, this installer installs drivers for supported memory card media. Supports OS X 10.6.8-10.11; macOS 10.12 (Sierra).
Release Notes:
Version 1.5.0 includes an improved, signed uninstaller compatible with macOS 10.12 (Sierra).
Known Issues:
When using Qio 1.5.0, you may need to start your computer from the shut down state in order for sleep to work properly.
If you are updating your computer's Qio software from version 1.1.7 or earlier, and you intend to update its OS from OS X 10.7.5 or earlier to 10.8 or later, you MUST install Qio 1.5.x software before upgrading the OS! For more information, see this FAQ .
Apple removed USB 2.0 over Thunderbolt support beginning in OS X 10.8.2. If you are using the Qio connected via Thunderbolt in 10.8.2+ and you need USB ExpressCard adapter support, then you need to install the USB 2.0 Over Thunderbolt Patch .
|   |
631 |
| Sony SxS Memory Card Driver for macOS 10.14-macOS 12 3.1.0 | | Jan-26-2022 | | Operating System Requirements: macOS 10.14-macOS 11 Description: SxS driver for macOS supports Sonnet SF3 Series SxS PRO X Card Reader, SF3 Series SxS Pro Card Reader, SxS PRO X Thunderbolt 3 Single Slot Reader, Echo ExpressCard Thunderbolt Adapter, Qio, and Qio E3.
Version 3.1.0 supports macOS 10.14 (Catalina)-macOS 12 (Monterey). This version is compatible with Intel and M1 Macs. Follow the procedures below for installing on M1 Macs.
For an M1 Mac:
Before the SxS device Driver can be installed on an M1 Mac, the security policy setting must be changed to Reduced Security using the following procedure.
1. On the M1 Mac, select Shut Down from the Apple menu.
2. Press and hold the power button until you see Loading startup options.
3. Click Options, then click Continue.
4. In macOS Recovery, if you are prompted for user selection, click Next and enter the password for an administrator account, if required.
5. In the Recovery Application, select Startup Security Utility from the Utilities menu.
6. Select the startup disk you want to use to set the security policy.
If the disk is encrypted with FileVault, click Unlock, enter the password, then click Unlock.
7. Click Security Policy.
8. Select Reduced Security, then select the Allow user management of kernel extensions from identified developers checkbox to allow installation of software that uses legacy kernel extensions and enter the password for an administrator account, if required.
9. Restart your Mac to apply the changes. |   |
710 |
| Sony SxS UDF Driver for macOS | | 2018-02-01 | | Operating System Requirements: macOS 10.11-10.13 Description: SxS UDF Driver software enables reading of MXF files recorded in UDF mode on SxS memory card. [Note: This driver is not sufficient to support the computer communicating with the device. You must also install the SxS Device Driver.] Installation of these drivers enables the Sonnet SF3 Series SxS PRO X Card Reader, SF3 Series SxS Pro Card Reader, SxS PRO X Thunderbolt 3 Single Slot Reader, Echo ExpressCard Thunderbolt Adapter, Qio, and Qio E3 to support UDF files. Download and install the latest UDF driver, and then restart your computer.
------------------------------------------------------------------------------------------
macOS Mojave, Catalina & Big Sur: The Sony UDF driver is not needed on macOS 10.14.6+. UDF support is built into newer versions of macOS.
------------------------------------------------------------------------------------------
If you have 1.0.1 UDF driver, first uninstall the existing Sony UDF driver manually by removing these files. In Terminal, type
sudo rm -r /System/Library/Extensions/SxSLogicalUnitDriverExpress.kext
sudo rm -r /System/Library/Extensions/SxSLogicalUnitDriverUS10.kext
sudo rm -r /System/Library/Extensions/sxsudf_fs.kext
sudo rm -r System/Library/Filesystems/sxsudf.fs
------------------------------------------------------------------------------------------
You can format SxS media as UDF in macOS using the Sony Memory Media Utility.
------------------------------------------------------------------------------------------
Final Cut Pro X Users: See this Apple Support Note. |   |
725 |
| USB 2.0 Over Thunderbolt Patch for Qio/Qio E3 1.1 | | Jun-17-2013 | | Operating System Requirements: Mac OS X 10.8+ File Name: dskcd-usbtbml-11.dmg File Size: 35.5 KB Description: This patch restores USB 2.0 functionality through Thunderbolt under OS X 10.8.5 and 10.9.5 for Qio and Qio E3 users.
Notes:
Qio and Qio E3 support USB 2.0 through the ExpressCard (SxS) slots' USB interfaces. With the release of OS X 10.8.2, Apple disabled USB 2.0 drivers over Thunderbolt. This patch removes that limitation so that USB 2.0 will work through Thunderbolt. This will affect you only if you are connecting your Qio or Qio E3 through an Echo ExpressCard Thunderbolt adapter or Echo Express Expansion Chassis for PCIe Cards. (Beginning with OS X 10.10, Apple no longer permitted driver patches.)
This patch will only run on 10.8.5 and 10.9.5, and you should download this under the following conditions:
1) You have a Qio or Qio E3
2) You are connecting the Qio over Thunderbolt (or will do so in the future)
3) You need USB 2.0 support over the Qio. For example, if you need to use a multi-format memory card reader like the one included with the Qio, you need USB 2.0 support.
|   |
1088 |
| Sony SxS UDF Driver for Windows 2.4.0 | | 2018-02-01 | | Operating System Requirements: Windows 10 (64-bit), Windows 11 Description: SxS UDF Driver software enables reading of MXF files recorded in UDF mode on SxS memory card. [Note: This driver is not sufficient to support the computer communicating with the device. You must also install the SxS Device Driver.] Installation of these drivers enables the Sonnet SF3 Series SxS PRO X Card Reader, SF3 Series SxS Pro Card Reader, SxS PRO X Thunderbolt 3 Single Slot Reader, Echo ExpressCard Thunderbolt Adapter, Qio, and Qio E3. to support UDF files.
Download and install the latest UDF driver, and then restart your computer.
You can format SxS media as UDF in Windows using the Sony Memory Media Utility. |   |
1176 |
| Sony SxS Memory Card Driver for macOS 10.12-10.13, version 3.0.0 | | Sep-19-2019 |   |
| | Firmware (2) | | ID | | Download Title | Download Link | Post Date |
600 |
| Qio Firmware Updater (OS X) 2.0.1 | | Jun-13-2013 |
642 |
| Qio Serial ROM Flasher (OS X) 1.0 | | Feb-15-2012 |   |
|
| Manual (4) | | FAQ (31) | | ID | | Article Title | Post Date |
491 |
| Are Sonnet Tempo SATA cards compatible with the Drobo S? | Feb-02-11 |
495 |
| My P2 card is unexpectedly unmounting from my Qio after I wake a Mac Pro or MacBook Pro from sleep. | Aug-01-13 |
499 |
| I get a blue screen on my Mac Pro/MacBook Pro instead of booting when I connect Qio | Mar-24-10 |
501 |
| Are all C600X CF Cards more or less equal performance in a Qio? | Mar-22-10 |
503 |
| Can I power the Qio from a FireWire port on a MacBook Pro? | Mar-23-10 |
509 |
| Is the Qio driver compatible with a 64-bit kernel boot of OS X 10.6 or 10.7? | Aug-01-13 |
510 |
| Can I use the AJA IO Express with the Sonnet Qio in a MacBook Pro? | Mar-23-10 |
512 |
| My Qio was working fine with my ExpressCard/34 bus interface card, but the Qio does not work with my PCIe Express bus interface card in an early 2009 MacPro. | Mar-31-10 |
514 |
| My unibody MacBook Pro will spontaneously restart after shutdown with Qio attached. | Mar-31-10 | | Check the bottom of the Qio for the serial number.
This can occur on some Qio units with a serial number begins with A, B, or C. Contact Sonnet support for more information. |   |
516 |
| What kind of battery can I use with the Qio? | Apr-08-10 |
527 |
| Why does my Maci take so long to boot when the Qio is attached?
| Jul-31-13 |
528 |
| Why can't a Mac Pro acknowledge the Qio if it is plugged in after the Mac is booted? | Sep-13-13 | | Plugging in a Qio is like plugging in PCIe cards. In the Mac Pro's case, although media (DVDs, CF cards, SD cards, etc) can be plugged in, there was never an expectation by OS X that a PCIe card could be hot-plugged into a Mac Pro. As a result, OS X has no infrastructure for detecting and starting a driver loading process. The plug-in event is not noticed by the system. |   |
536 |
| With a Qio connected, my Mac Pro kernel panics when I shut down after using Avid Media Composer. | Jul-31-13 | | Avid Media Composer 4.05 is not compatible with the Sony SxS driver. Please seek support from Avid and/or Sony. |   |
547 |
| I'm getting a OS X kernel panic when I remove an SxS card from the Qio connected to a tower Mac Pro that also has a video capture card installed. | Oct-31-14 |
563 |
| I'm getting a long blue screen when I boot a Mac with Qio installed. | Sep-13-13 |
566 |
| I upgraded to 10.6.8 and my system no longer boots. | Sep-26-11 |
576 |
| What version of OS X do I need to use Qio with MacBook Pro? | Aug-20-14 |
581 |
| Is Qio Compatible with 17" Thunderbolt MacBook Pro? | Sep-13-13 |
632 |
| Is Qio compatible with Echo ExpressCard/34 Thunderbolt Adapter? | Jul-31-13 | | Yes, but it requires the Sonnet PCIe Bus Extender ExpressCard/34 Revision B (serial number beginning with B), which began shipping December 2011; or the Sonnet PCIe 2.0 Bus Extender ExpressCard/34. |   |
633 |
| Is Qio compatible with the Matrox T/ADP Thunderbolt Port Adapter? | Feb-28-12 |
639 |
| Is the Qio PCIe 2.0 Bus Extender card compatible in all slots of the Mac Pro 5,1? | May-06-13 |
646 |
| How can I read UDF Formatted SxS cards? | Aug-11-17 | | You need to download and install the Sony SxS UDF Driver, available here http://pro.sony.com/bbsc/ssr/cat-recmedia/resource.downloads.bbsccms-assets-mkt-recmedia-downloads-upgrades.shtml |   |
648 |
| Why is the Panasonic OS X P2 driver not compatible with 64-bit mode, while the Sony SxS driver, CF driver and SATA drivers are compatible with 64-bit mode? | Oct-31-14 | | This issue is now resolved. The Panasonic P2 driver included with Qio software version 1.2.3 and later is 64-bit compatible. Installing Qio 1.3.2 or later adds P2 support to systems running OS X in 64-bit mode, including Mavericks (10.9) and Yosemite (10.10)
|   |
651 |
| Do Qio and Qio CF4 support UDMA 7 CompactFlash cards? | May-06-13 | | Yes, Qio and Qio CF4 support UDMA 7 CompactFlash cards in UDMA 6 mode.
Background: CompactFlash Revision 6.0 (November 2010) added UltraDMA Mode 7 (167 MB/s), which is up to 20% faster than UDMA 6 (133MB/sec). All UDMA 7 CompactFlash cards are compatible with UDMA 6 cameras and readers.
The Qio's CompactFlash slots can be read concurrently. The Qio can read the fastest CF cards at up to 133MB/s each and a total aggregate of 200MB/s (two cards).
The Qio CF4 can read all four CompactFlash slots concurrently. When connected to a desktop machine, the maximum aggregate read speed is 133MB/sec (one card), 266MB/sec (two cards), 400MB/sec (three or four cards). |   |
653 |
| I connected a Red Station media reader to the eSATA ports, but the media would not mount. How do I mount the media? | May-06-13 |
678 |
| Is the Qio compatible with OS X 10.10 (Yosemite) and OS X 10.9.5 (Mavericks)? | Oct-31-14 |
693 |
| My computer kernel panics after updating OS X to 10.8.2. What can I do to fix it? (Qio/Qio CF4/Qio E3 issue) | Nov-06-12 | | The OS X 10.8.2 update breaks compatibility with Qio, Qio CF4, and Qio E3 pro media readers, resulting in kernel panics on systems with Qio v1.1.6 and earlier software installed. By following the steps below, you may enable your system to work again, but the Qio will not operate after the procedure until you install Qio v1.1.8 or later software.
Process:
1. Cold-boot your computer holding the cmd and R keys together (this forces the computer to boot from the recovery partition)
2. Select the language
3. Open the Disk Utility application
- If your main operating system drive is locked (grayed out), select it and choose to “unlock” in the icon list at the top of the screen
- Note the name of the volume that holds your operating system - usually "Macintosh HD" – you will need this name later in these instructions
4. Quit Disk Utility
5. From the Utilities Menu, open the Terminal application.
6. Type the following commands, pressing the Enter key in between each command:
NOTE: In the following commands, <VOLNAME> is the name of the partition that your operating system resides on. This should have been obtained in step 3b. If your volume name has a space in it, such as "Macintosh HD", a “\” character must precede the space in the volume name (ie "Macintosh\ HD")
rm -r /Volumes/<VOLNAME>/System/Library/Extensions/STPCIFamily*
cp -rf /Volumes/<VOLNAME>/Library/Application\ Support/QIO/IOPCIFamily.kext /Volumes/<VOLNAME>/System/Library/Extensions
touch /Volumes/<VOLNAME>/System/Library/Extensions
7. Quit all applications and restart the computer.
|   |
713 |
| My Qio Does Not Recognize My SD-to-SxS Adapter | May-07-13 |
730 |
| I have a Retina MacBook Pro (or other Mac introduced in 2012), and my machine won't boot after installing Qio software. | Dec-06-12 |
757 |
| My Stardom RAIDSonic ST3620-2S-S2 is not reliable with 6Gb drives and and a 6Gb controller. | Jul-08-13 |
1135 |
| Can I format an SxS card in UDF format in macOS? | Jan-20-21 |   |
|
|
|
|