Operating System Requirements: Mac OS X 10.6+ File Name: QioPCFirmwareUpdater2.0.1.dmg File Size: 217.8 KB Description: This OS X software updates the firmware in the Sonnet Qio. This version updates expands the PC compatibility of Qio (revision H and later, as identified in the serial number). After the firmware is updated, the Qio will continue to operate as before with Mac computers.
Notes:
1) If you are updating an older Qio (part numbers QIO-E34 and QIO-PCIE, revision A - G), you must also use the Mac OS serial ROM flasher to make the Qio Windows-compatible.
2) You may need to run this updater twice. If the firmware updater is unsuccessful after the second attempt, please contact Sonnet support for further assistance.
Sonnet has tested the following cards with the Drobo S:
Tempo SATA E2P..............................compatible
Tempo SATA E4P..............................not compatible
Tempo SATA ExpressCard/34...........compatible
Tempo SATA Edge ExpressCard/34...compatible
Tempo SATA Pro ExpressCard/34.....not compatible
Tempo SATA X4P..............................not compatible
Qio eSATA ports...............................not compatible
Yes, but you must hot plug the Qio's interface card into the ExpressCard/34 slot of the 17" Thunderbolt MacBook Pro. The Qio will not be recognized in the 17" Thunderbolt MacBook Pro if you boot or restart with the Qio plugged into the ExpressCard/34 slot. See FAQ 632 for more infomation about compatibility connecting Qio via Thunderbolt.