| Please click the arrow next to the category to expand or collapse: |
 | Driver (6) | | | ID | | Download Title | Download Link | Post Date |
|
629 | 
| Qio E3 System Installer and Uninstaller (OS X, macOS) 1.5.0 | | Nov-29-2016 | | Operating System Requirements: Mac OS X 10.6+, macOS 10.12+
File Name: dskcd-qioe3-150.dmg
File Size: 1.3 MB
Description: This software enables the use of Qio E3 with Mac Pro and MacBook Pro computers with a PCIe slot or ExpressCard slot, respectively, and with other Mac computers connected via Thunderbolt. Supports OS X 10.6.8-10.11; macOS 10.12 (Sierra).
Release Notes:
Version 1.5.0 includes an improved, signed uninstaller compatible with macOS 10.12 (Sierra).
Notes:
• If you are updating your computer's Qio E3 software from version 1.1.7 or earlier, and you intend to update its OS from OS X 10.8.1 or earlier to 10.8.2 or later, you MUST install Qio E3 1.5.x software before upgrading the OS! For more information, see this FAQ .
• Apple removed USB 2.0 over Thunderbolt support beginning in OS X 10.8.2. If you are using the Qio E3 connected via Thunderbolt in 10.8.2+, and you need to support USB ExpressCard adapters, then you need to install the USB 2.0 Over Thunderbolt Patch .
• You must also install SxS device drivers to enable the Qio E3 to support SxS memory cards. | | |
|
725 | 
| USB 2.0 Over Thunderbolt Patch for Qio/Qio E3 1.1 | | Jun-17-2013 |
|
727 |
| XQD Adapter Device Drivers Installer for macOS 3.0.0 | | 2023-03-28 |
|
749 |
| ExpressCard Hot Plug Driver (Windows) 1.1 | | Dec-22-2016 |
|
1085 |
| XQD Adapter Device Drivers Installer for Windows | | 2018-07-13 |
|
1088 |
| Sony SxS UDF Driver for Windows 2.4.0 | | 2018-02-01 | | |
| | Firmware (1) | | | ID | | Download Title | Download Link | Post Date |
|
666 |
| Qio E3 Firmware Updater (Windows) 2.0.1 | | Jun-13-2013 | | Operating System Requirements: Windows Vista (32-bit), Windows Vista (64-bit), Windows 7 (32-bit), Windows 7 (64-bit), Windows Server 2008 (32-bit), Windows Server 2008 (64-bit), Windows Server 2008 R2 (64-bit)
File Name: SonnetQioUpdater2.0.1.zip
File Size: 814.9 KB
Description: This Windows installer updates the firmware in the Qio E3 (model numbers QIO-E3-E34 and QIO-E3-PCIE, all revisions). This version expands the Qio E3's PC compatibility. Please refer to Qio E3 product page for specific compatibility information. After the firmware is updated, the Qio E3 will continue to operate as before with Mac computers.
Notes:
1) You must burn the enclosed .iso file to a CD, and alter your computer's BIOS to enable booting from a CD.
2) You may need to run this updater twice. If the firmware updater is unsuccessful after the second attempt, please contact Sonnet support for further assistance.
Instructions
1. Connect the Qio E3 (install the interface card, connect the interface cable, and plug in the AC adapter) as described in the Qio E3 User's Guide.
2. Turn on your computer and boot immediately into the computer's BIOS (or setup) menu.
3. Change your computer's BIOS settings so that the computer will boot from a CD-ROM first, and then restart your computer. Note: The steps required to change your computer's BIOS will vary with each computer model. Please refer to your computer's user manual for specific instructions on how to perform this procedure.
4. Burn the SonnetQioUpdaterX ISO file to a CD.
5. Verify the Qio is connected securely to the computer and has power.
6. Restart the computer with the SonnetQioUpdater CD in the CD drive; after the boot process, a menu will be displayed on the screen.
7. Select Load SATA CD/DVD Drivers and then press enter.
Note: If your computer has an optical drive with a PATA (IDE) interface, choose option 2 to load PATA CD/DVD drivers instead.
8. At this time, the computer will be awaiting instruction. Type "cd QIOE3" (without quotes), and then hit Enter
9. Type "go" (without quotes), and then press Enter.
10. If the firmware update was successful, you will see a message saying so. Eject the CD and restart your computer; the firmware update is complete.
| | | | |
|
|
|
