ID | | Article Title | Post Date |
491 |
| Are Sonnet Tempo SATA cards compatible with the Drobo S? | Feb-02-11 |
495 |
| My P2 card is unexpectedly unmounting from my Qio after I wake a Mac Pro or MacBook Pro from sleep. | Aug-01-13 |
499 |
| I get a blue screen on my Mac Pro/MacBook Pro instead of booting when I connect Qio | Mar-24-10 |
501 |
| Are all C600X CF Cards more or less equal performance in a Qio? | Mar-22-10 |
503 |
| Can I power the Qio from a FireWire port on a MacBook Pro? | Mar-23-10 |
| This powering method is not officially supported because the Qio can require more power than one FireWire port's power specification. However, the single FireWire port on the unibody MacBook Pro seems to be capable of providing more power (up to 20W in our test) than its specification. In Sonnet tests under the following conditions:
1) If Qio is used with only memory cards (SxS's or SDHC, but not ExpressCard/34 controller cards; P2 cards but not CardBus controller cards; and/or CF Cards);
2) Qio has not more than one Fusion F2 powered from the Qio; and
3) MacBook Pro is unibody model;
then the Qio plus one Fusion F2 seems to be able to be bus powered from the unibody MacBook Pro FireWire port. You would need to use the FireWire power cable provided with the Fusion F2. Sonnet does not guarantee or support this configuration.
This does not seem to work in MacBook Pro models previous to the unibody. |
  |
509 |
| Is the Qio driver compatible with a 64-bit kernel boot of OS X 10.6 or 10.7? | Aug-01-13 |
510 |
| Can I use the AJA IO Express with the Sonnet Qio in a MacBook Pro? | Mar-23-10 |
| Yes. Just plug the AJA ExpressCard/34 adapter into one of the Qio's two ExpressCard/34 slots. |
  |
512 |
| My Qio was working fine with my ExpressCard/34 bus interface card, but the Qio does not work with my PCIe Express bus interface card in an early 2009 MacPro. | Mar-31-10 |
514 |
| My unibody MacBook Pro will spontaneously restart after shutdown with Qio attached. | Mar-31-10 |
| Check the bottom of the Qio for the serial number.
This can occur on some Qio units with a serial number begins with A, B, or C. Contact Sonnet support for more information. |
  |
516 |
| What kind of battery can I use with the Qio? | Apr-08-10 |
527 |
| Why does my Maci take so long to boot when the Qio is attached?
| Jul-31-13 |
528 |
| Why can't a Mac Pro acknowledge the Qio if it is plugged in after the Mac is booted? | Sep-13-13 |
536 |
| With a Qio connected, my Mac Pro kernel panics when I shut down after using Avid Media Composer. | Jul-31-13 |
547 |
| I'm getting a OS X kernel panic when I remove an SxS card from the Qio connected to a tower Mac Pro that also has a video capture card installed. | Oct-31-14 |
563 |
| I'm getting a long blue screen when I boot a Mac with Qio installed. | Sep-13-13 |
566 |
| I upgraded to 10.6.8 and my system no longer boots. | Sep-26-11 |
576 |
| What version of OS X do I need to use Qio with MacBook Pro? | Aug-20-14 |
| OS X 10.5.8-10.9 required for Mac Pro and MacBook Pro (non-Thunderbolt).
OS X 10.6.8-10.9 required for MacBook Pro (Thunderbolt). |
  |
581 |
| Is Qio Compatible with 17" Thunderbolt MacBook Pro? | Sep-13-13 |
| Yes, but you must hot plug the Qio's interface card into the ExpressCard/34 slot of the 17" Thunderbolt MacBook Pro. The Qio will not be recognized in the 17" Thunderbolt MacBook Pro if you boot or restart with the Qio plugged into the ExpressCard/34 slot. See FAQ 632 for more infomation about compatibility connecting Qio via Thunderbolt. |
  |
632 |
| Is Qio compatible with Echo ExpressCard/34 Thunderbolt Adapter? | Jul-31-13 |
633 |
| Is Qio compatible with the Matrox T/ADP Thunderbolt Port Adapter? | Feb-28-12 |
| No, the Qio software is not yet compatible with a Thunderbolt connection. When Qio is compatible, it should work with the Matrox T/ADP Thunderbolt Port Adapter. |
  |
639 |
| Is the Qio PCIe 2.0 Bus Extender card compatible in all slots of the Mac Pro 5,1? | May-06-13 |
646 |
| How can I read UDF Formatted SxS cards? | Aug-11-17 |
648 |
| Why is the Panasonic OS X P2 driver not compatible with 64-bit mode, while the Sony SxS driver, CF driver and SATA drivers are compatible with 64-bit mode? | Oct-31-14 |
| This issue is now resolved. The Panasonic P2 driver included with Qio software version 1.2.3 and later is 64-bit compatible. Installing Qio 1.3.2 or later adds P2 support to systems running OS X in 64-bit mode, including Mavericks (10.9) and Yosemite (10.10)
|
  |
651 |
| Do Qio and Qio CF4 support UDMA 7 CompactFlash cards? | May-06-13 |
653 |
| I connected a Red Station media reader to the eSATA ports, but the media would not mount. How do I mount the media? | May-06-13 |
| Mac OS 10.7.5 will not mount FAT32 volumes connected to the eSATA ports of this device. (FAT32 volumes mount fine in 10.6.8 and in 10.8.2 and later.)
As a workaround, you can manually mount volumes with the following procedure:
1) Open terminal (Applications > Utilities > Terminal)
2) Run the following command:
diskutil list
Look for the target volume in the IDENTIFIER column. The volume will have a name like disk4s2.
3) Create a mount point by using the following terminal command:
mkdir /Volumes/myvolume
Note: myvolume is the name of the mount point you will create and must be unique - for example, you cannot mkdir /Volumes/FAT if a volume named FAT is already mounted.
4) Mount the target volume with the command:
sudo mount -t msdos /dev/disk4s2 /Volumes/myvolume
Note: disk4s2 is the from the IDENTIFIER column from step 2. myvolume is the unique name you chose in step 3.
The volume should now be mounted and is available for use. The volume must also be unmounted through terminal - finder will not be able to unmount the volume.
The command to unmount the volume is:
sudo umount /Volumes/myvolume
where myvolume is the mount point you created in step 3. |
  |
678 |
| Is the Qio compatible with OS X 10.10 (Yosemite) and OS X 10.9.5 (Mavericks)? | Oct-31-14 |
693 |
| My computer kernel panics after updating OS X to 10.8.2. What can I do to fix it? (Qio/Qio CF4/Qio E3 issue) | Nov-06-12 |
| The OS X 10.8.2 update breaks compatibility with Qio, Qio CF4, and Qio E3 pro media readers, resulting in kernel panics on systems with Qio v1.1.6 and earlier software installed. By following the steps below, you may enable your system to work again, but the Qio will not operate after the procedure until you install Qio v1.1.8 or later software.
Process:
1. Cold-boot your computer holding the cmd and R keys together (this forces the computer to boot from the recovery partition)
2. Select the language
3. Open the Disk Utility application
- If your main operating system drive is locked (grayed out), select it and choose to “unlock” in the icon list at the top of the screen
- Note the name of the volume that holds your operating system - usually "Macintosh HD" – you will need this name later in these instructions
4. Quit Disk Utility
5. From the Utilities Menu, open the Terminal application.
6. Type the following commands, pressing the Enter key in between each command:
NOTE: In the following commands, <VOLNAME> is the name of the partition that your operating system resides on. This should have been obtained in step 3b. If your volume name has a space in it, such as "Macintosh HD", a “\” character must precede the space in the volume name (ie "Macintosh\ HD")
rm -r /Volumes/<VOLNAME>/System/Library/Extensions/STPCIFamily*
cp -rf /Volumes/<VOLNAME>/Library/Application\ Support/QIO/IOPCIFamily.kext /Volumes/<VOLNAME>/System/Library/Extensions
touch /Volumes/<VOLNAME>/System/Library/Extensions
7. Quit all applications and restart the computer.
|
  |
713 |
| My Qio Does Not Recognize My SD-to-SxS Adapter | May-07-13 |
730 |
| I have a Retina MacBook Pro (or other Mac introduced in 2012), and my machine won't boot after installing Qio software. | Dec-06-12 |
757 |
| My Stardom RAIDSonic ST3620-2S-S2 is not reliable with 6Gb drives and and a 6Gb controller. | Jul-08-13 |
1135 |
| Can I format an SxS card in UDF format in macOS? | Jan-20-21 |
  |