Customer Service
Sonnet Logo
Customer Service
Products Where to Buy Store Support News & Media About Sonnet Partner Resources

Fusion Thunderbolt 3 PCIe Flash Drive
Please click the arrow next to the category to expand or collapse:
Driver (0)
Firmware (0)
Manual (1)
FAQ (7)
IDArticle TitlePost Date
891 After hot unplug/plug my HP ZBook gets a "Unable to load driver because a previous driver is still in memory" error.Jan-03-17
906 I'm getting low throughput on my Thunderbolt 3 device. Why could this be?Oct-05-17
942 Can I replace the M.2 module inside the Fusion Flash Drive?Sep-25-17
Unequivocally not!

For the following reasons:
1) An alternate SSD module would likely not fit. The internal heat sink case is milled with very tight tolerances for a specific SSD for efficient heat conduction.
2) Without customized heat sinking, an alternative SSD module would likely overheat.
3) An alternate SSD would likely unexpectedly disconnect in the middle of a write because of a power surge. Sonnet carefully chose and tested an SSD that does not exceed the Thunderbolt power limit. Most SSDs consume more power than Thunderbolt can support for a bus-powered device.
4) You may damage your computer.
5) You would void your warranty.
973 The Fusion Flash Drive is not showing up in Disk Utility on macOS 10.13.Mar-07-18
1021 Can I connect the Fusion Thunderbolt 3 Edition PCIe Flash Drive to a Thunderbolt 2 Mac?Jul-23-18
1043 My computer is not recognizing the Fusion Thunderbolt 3 Flash Drive deviceDec-15-18
1045 Upon connecting the Thunderbolt 3 Fusion Flash Drive, I see an error message "Accessory Needs More Power"Dec-18-18
Your computer does not have 15W available that the Thunderbolt 3 Fusion Flash Drive requires, but instead only 7.5W.

When plugging external devices into a MacBook Pro, the 15-inch and 13-inch models with four Thunderbolt 3 ports will provide 15W only to the first two devices and then 7.5W to the second two devices in the order that they are plugged in, irrespective of port and device type. The 13-inch model with only two Thunderbolt 3 ports will provide 15W to the first device and 7.5W to the second. Try disconnecting all the devices and plug in the Thunderbolt 3 Fusion Flash Drive first.

Some PCs do not supply 15W to all of the Thunderbolt 3 ports. Check you computer specifications for details. Make sure the Thunderbolt 3 Fusion Flash Drive is the first device plugged into the computer.

Copyright © 2016 Sonnet Technologies, Inc. All rights reserved. | Trademarks